mac driver for seagate external hard drive

#Mac driver for seagate external hard drive windows

Hitting the red button shuts down the computer completely and it won't restart until I press the power button on the CPU. a green 'restart'button Most people pick the red 'turn off' button when they shut down for the night, only using the green 'restart' button if they want to continue immediately. Clicking on the 'turn-off computer'button brings up three choices: 1. That brings up two choices: a 'log-off' button or a 'turn-off computer' button. Here's the explanation: To shut down Windows, you click the 'Start' button at the bottom of the screen.

#Mac driver for seagate external hard drive windows

These are standard options with all Windows Operating Systems, I believe. Your other question (about the buttons to shut down the computer). But both Dell and Seagate have explored that section of BIOS so they know (and hopefully understand) the boot sequence and would know if there is a problem with the sequence. I can't answer that question because I think it would require going into BIOS to check.

You asked if I was absolutely sure no USB devices are listed in the boot sequence.

We've even gone into BIOS so that option has been explored. I'm weary! The solution is probably simple. Conversations are still going on with both. I've talked to Seagate several times over several days and he hasn't solved the problem. I've talked to a technician at Dell for literally three hours over several days and he hasn't resolved the problem. No problem as long as I shut down using the green 'restart' button, only when I use the red button. All of this happens ONLY when I shut down windows by using the red shutdown button (as opposed to the green restart button) If I shut down using the green restart button and not the red button, windows boots and the computer recognizes the Seagate. But then all the problems just repeat themselves (try to reboot and windows freezes, until I disconnect the Seagate). Plug in the Seagate USB and Power and computer recognizes the Seagate. Unplug the Seagate external HD and the computer will reboot properly. But when I shut down and reboot again, Windows does not load but freezes with a black screen and a flashing cursor. When I boot the computer and plug in the power and USB cords for the Seagate, the computer recognizes the Seagate. I have a Seagate external drive connected to my Dimensions 4700C.